In the never ending quest to make the VZ-58 easier to operate and more ergonomic, I’ve replaced the factory magazine release with an aftermarket option. Specifically I’ve used the VZ-58/CZ-858 Extended Magazine Release from Dlask Arms Corp. of Delta British Columbia.
Dlask Extended Magazine Release installed
This is the third and final installment of the AR15 Upper Receiver Group build series. In Part 1 we looked at parts, tools, and some other considerations. In Part 2 I documented the assembly process. Finally we’ll look at whether or not I assembled a working rifle and review some lessons learned.
The author and the 11.5″ AR15 at a practice
Welcome to Part 2 of the 3 part series in which I show you how I assembled a new Upper Receiver Group for my AR15. In Part 1 we looked at design considerations, legal issues, and tools. This article will cover the assembly process. Seasoned AR15 operators will know that the AR is essentially Barbie for men. AR owners can accessorize and modify their rifle with minimal training or tools. As I’m demonstrating, even the untrained can assemble the parts to build a working rifle. The AR15 is one of the few platforms where many manufacturers work within a specification and build mostly interchangeable parts. Continue reading
Welcome to Part 1 of the 3 part series in which I show you how I assembled a new Upper Receiver Group for my AR15. The series will examine the tools used, the design choices I made, the build process, and my thoughts on the project.
I’m not a gunsmith, professional gun fighter, or all that mechanically inclined. I’m your average Canadian by day and an avid shooter and firearms enthusiast in my spare time.
Most of the parts laid out